Home > Tips > Build a Simple NAS Setup with FreeNAS 8

Build a Simple NAS Setup with FreeNAS 8

January 6th, 2012

Train Signal has published a new tutorial which guides you through an installation of FreeNAS 8 on a simple system using two hard drives for a fully functional network attached storage solution. The tutorial goes through the steps needed to boot and install FreeNAS 8 on a modest system with two hard drives. The first hard drive is a small 2GB drive to hold the FreeNAS operating system and the second a 2TB drive for serving data to the network.

The sections included are:

  • Install
  • Setting a Static IP Address
  • Storage
  • Add a User
  • Sharing over the Network
  • Connect from Windows
Categories: Tips Tags:
Comments are closed.